Long Service Life Oil & Gas Fired Thermic Fluid Heaters

Thermic Fluid Heater, thermal oil boiler
Heat Power:300,000-2,000,000 Kcal/H
Working Pressure :0.8 Mpa
Fuel :light oil,heavy oil,diesel
Application : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry
YY (Q) W series thermal oil boiler is a kind of boiler which uses gas(oil) as fuel ,thermic oil as medium, hot oil circulation pump to make the medium to forced circulation, deliver the heat to heating need equipments and then  go back to the heating furnace.It can obtain a high  operating temperature at  low pressure and can do high-precision control on the medium.
Working Principal Of Thermic Fluid Heater
This thermic fluid boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a  convection heating surface.Fuel burn  fully in the combustion chamber, the  radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.

1, larger coil combustion chamber can make the combustion in low temperature and reduce the nitrogen oxides emissions with the characters of energy saving and environmental protection.
2, the thermal oil heater structure increases the thermal efficiency. And the high-density ring tube design structure can also reduce the occupation space.
3. The reasonable circulation section structure of multi-pass heat transfer ensure the thermal oil flow load uniform and the operation stable
4, complete control system with warning system, easy operation, safe operation.
5. Spiral coil inside and outside the furnace is composed of many small diameter tube with the advantage of good performance thermal expansion and low pressure.
6, The output (oil) temperature can be accurately controlled. Medium temperature, pressure and smoke temperature protection can also be controlled.
The thermal oil heaters in assembly structure is easy for installation by just connecting system devices. Intelligent control system makes heater operation control easy. Controller with screen display has auto igniting, burning, circulation pumps control, alarm and other control functions

Heat Transfer & Thermal Fluid Heating Systems
Thermal Oil Boiler is applied for 
Wood industry: Drying and forming of beaver board, shaving board, laminated sheet, etc.
Building industry: Asphalt dissolution, concrete heating tank, waterproof material, felt production, etc
Textile dyeing and finishing Industry: Heat setting, textile printing, ageing, drying, etc.
Plastic and rubber industry: Hot pressing, calendering, extrusion, vulcanization, artificial leather processing, etc.
Chemical industry: Polymerization and condensation reaction, distillation, rectification, concentration, evaporation, fusion
Oil production industry: Decomposing, deodorization, oil acid distillation, hydrogenation and esterification reaction, etc.

1.What are the heat-resistance temperature of grate and furnace?