Basic Info.
Model NO.
15TPD used oil recycling to diesel
After-sales Service
Video Technical Support, Online Support
Automation
Semi-Automatic
Raw Material
Crude Oil, Used Engine Oil, Dirty Black Oil
End Products
Diesel Oil, Waste Gas, Slag
Average out-Put Oil Rate
85%-90%
Operating Pressure
Constant Pressure
Heating Material
Coal, Charcoal, Fuel Gas, Fuel Oil
Material of Reactor
Q245r Boiler Plate
Thickness of Reactor
16mm
Mode of Cooling
Circulating Water Cooling
Space Needed
Length: 30m, Width :10 M
Power Consumption
20 Kw/H
Trademark
Jinzhen Machine
Transport Package
Wood Box
Product Description
15TPD Used Engine Oil/Motor Oil Recycling to Diesel EquipmentProduct Description
waste oil distillation machine can recycle waste tire pyrolysis oil, waste plastic pyrolysis oil, waste engine oil, waste lubricant oil and oil sludge into diesel.
Input capacity: 5ton-30ton
Output capacity per day: 3ton-10ton
Fuel for heating: coal / wood / natural gas / distillate oil
Installation cover area: 300-400 square meters
Workers: need 2-3 workers for machine operation Pyrolysis oil /used engine oil can be refined into valuable diesel oil through catalytic cracking and high temperature distillation technology. It is a method of separating mixtures based on differences in volatilities of components in a boiling liquid mixture. After beling distilled by the distillation plant, the oil may have dark color with bad smell, then we suggest to deep purify the oil, with Huayin matched color and smell removal system and special catalyst ,you will get clean diesel oil as final products with beautiful light yellow color.
Oil sludge usually comes from
1.Crude oil extraction - the oil sludge produced of crude oil extraction mainly comes from the surface treatment system, this kind of oil sludge generally has the characteristics of high oil content , high viscosity , fine particles and difficult to dehydrate.
2.Oil field gathering and transportation- mainly from the transfer station , the joint station of the tank , setting tank , sewage tank , grease trail mud , refinery oil treatment facilities , light hydrocarbon processing plant , natural gas purification device , etc.
3.Refinery wastewater treatment plant
4.Steel Smelting
5.Shipbuilding ship repair
3D Drawing for the waste oil distillation plant
Technological Process
Raw oil after dewater process goes into reactor. Heating, gasifying and cooling to get petrol and diesel component.
After heating and gasifying, Petrol gas expels from top outlet of catalyze tower, and goes into petrol storage tank after cooling through condenser.Then inject petrol into another big storage tank.
After heating and gasifying, Diesel gas expels from top outlet of catalyze tower, and goes into diesel storage tank after cooling through condenser. Then inject diesel into another big storage tank.Distilled diesel after treatment by oil reconcile tank,will becoming fuel oil with high quality.A little of flammable gas go through medium tank and into exhaust gas treatment equipment to be processed. And then go through water deal into furnace to burn.
Product Parameters
Item | Contents |
Raw material | Waste engine/motor oil Plastic pyrolysis oil Tire pyrolysis oil Lubrication oil |
Average out-put oil rate | 85%-90% |
End products | Diesel oil, waste gas, slag |
Structure form | Horizontal |
Operating pressure | Constant pressure |
Heating material | Coal, charcoal, fuel gas, fuel oil |
Model(Diameter*Length) (mm) | Reactor size | Capacity |
D1500*L3000 | 3 Ton/Day |
D2000*5000 | 5 Ton/Day |
D2800*6000 | 10 Ton/Day |
Material of reactor | Q245R&Q345R boiler plate |
Thickness of reactor | 16mm, 18mm |
Mode of cooling | Circulating water cooling |
Space needed | Length: 30m, Width :10 m at most |
Power consumption | Average 15 KW/h |
The main list of waste oil distillation equipment
A. Vertical reactor/Horizontal reactor
B. Reducer system
C. Condensation system
D. Collector
E. Oil collecting tank
F. Residue tank
G. Oil-gas separator
H. Water cooling system
I. Water seal
J. Pressure & Temperature monitoring gauge
K. Deodorization system
L. Efficient anti clog cooling system
M. Gas heating system (waste gas process system)
N. Smoke desulphurization and dust removal systemTechnical Advantage
a. Reduce pressure distillation technology--- advanced distillation
This new technology is better than original ordinary pressure distillation technology, which shows on purity,Transparent, and lightness. This technology will do deodorization and destine process to the raw material oil automatically by "dry type" reduce pressure distillation method, which can fall of the temperature of distill process and the oil output will higher 5%-10%.
b. Continuous produce 24-hours--- advanced distillation
24-hours raw material put into automatically according to oil output flow and reactor temperature.
c. High efficient gas heating system--- advanced distillation
During this process, it will produce a large amount of gas CH4-C2H6, which cannot be fluidity with normal temperature and pressure. Those gas will be fully burned in the special gun nozzle and produce a plenty energy.
d. Intelligence smoke dust removal system--- advanced distillation
The smoke dust removal system with intelligence desulphurization, have a special with bi-directional water impact cyclone dust remove room, which can ensure the smoke discharge amount meet governmental relative standards.
Environmental Protection
For water, it is used in two parts. In the cooling system, all the water is recycling, some water is evaporate due to high temperature, in some times, we just need to add water, no water emission. In the dedust system, the water is recycling, too.Due to the chemical reaction, the water is cleaned in the pool and recycled to dust removing device. No water emission.
About the gas, it includes two parts. First is the syngas, it is recycled to the furnace for heating, no emission. Another is the smoke, it is caused by the heating material. And it is cleaned by water in the dedust system.NO emission, too.
About the carbon black, we do the further process and our discharging system is fully closed, no slag flies out.No slag emission.
About the noise , we design draft fan with low noise and make it under international standard.
Above all, all the design can reach the international environmental standard.Detailed Photos
After Sales Service
1.Engineers with over ten years' waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.
2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.
3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.
Address:
No. 49, East Jinshui Road, Zhengzhou, Henan, China
Business Type:
Trading Company
Business Range:
Manufacturing & Processing Machinery
Management System Certification:
ISO 9000, ISO 14001, IATF16949
Company Introduction:
Henan Jinzhen Industry Co., Ltd. is professional waste tyre recycling machine and steam boiler supplier in China, who is specializing in the research of waste tyre oil pyrolysis plant, scrap tire to oil pyrolysis machine, waste plastic pyrolysis plant, rubber pyrolysis machine, waste oil distillation machine, pyrolysis oil distillation plant, used oil to diesel machine, waste oil to diesel machine, steam boiler, thermal oil boiler. It will make waste rubber, waste plastics and waste oil as raw materials to produce fuel oil and diesel.
Our company was established in 2019, and our factory have many years of history in the machinery industry. Located near Qingdao port, we enjoy convenient water, land transportation. The factory is located in Weibin District, Xinxiang City, Henan Province, China. Factory covers 12, 000 square meters. It has a comprehensive strength of product development, manufacturing and sales.
Jinzhen Machinery employs more than 125 workers; Through the efforts of our entire staff, we have become a B machinery manufacturer. We have continuously tried to improve product quality, introducing German and Japanese technology. Moreover, we use top-of-the-line German ultra wear-resistant paint, giving our company good technical capabilities. Our annual production capability is export 8 million of last year.
The company has passed ISO9001: 2008, CE, BV and quality management system certification. Our product are sold well at home and abroad. The main customers are Poland, Spain, Greece, Philippines, Malaysia, Vietnam, Laos, Cambodia, Myanmar, South Africa, Ghana, Nigeria, Zambia, etc.